Javascript required
Skip to content Skip to sidebar Skip to footer

Aerosol Satin Black Paint Job

Aerosols: Tiny Particles, Big Impact

Design by Robert Simmon November 2, 2010

Take a deep breath. Even if the air looks clear, it's nearly certain that you'll inhale tens of millions of solid particles and liquid droplets. These ubiquitous specks of matter are known as aerosols, and they can be found in the air over oceans, deserts, mountains, forests, ice, and every ecosystem in between. They drift in Earth's atmosphere from the stratosphere to the surface and range in size from a few nanometers—less than the width of the smallest viruses—to several several tens of micrometers—about the diameter of human hair. Despite their small size, they have major impacts on our climate and our health.

Haze in Shenzen, China.

Aerosols—tiny, airborne solid & liquid particles—are present throughout the atmosphere and largely responsible for hazy skies, as in this photograph of Shenzen, China. (Photograph ©2010 pseudo-san.)

Different specialists describe the particles based on shape, size, and chemical composition. Toxicologists refer to aerosols as ultrafine, fine, or coarse matter. Regulatory agencies, as well as meteorologists, typically call them particulate matter—PM2.5 or PM10, depending on their size. In some fields of engineering, they're called nanoparticles. The media often uses everyday terms that hint at aerosol sources, such as smoke, ash, and soot.

Climatologists typically use another set of labels that speak to the chemical composition. Key aerosol groups include sulfates, organic carbon, black carbon, nitrates, mineral dust, and sea salt. In practice, many of these terms are imperfect, as aerosols often clump together to form complex mixtures. It's common, for example, for particles of black carbon from soot or smoke to mix with nitrates and sulfates, or to coat the surfaces of dust, creating hybrid particles.

Photograph of different types of aerosols.

Sea salt, dust, and volcanic ash are three common types of aerosols. (Photograph by Katherine Mann.)

The bulk of aerosols—about 90 percent by mass—have natural origins. Volcanoes, for example, eject huge columns of ash into the air, as well as sulfur dioxide and other gases, yielding sulfates. Forest fires send partially burned organic carbon aloft. Certain plants produce gases that react with other substances in the air to yield aerosols, such as the "smoke" in the Great Smoky Mountains of the United States. Likewise in the ocean, some types of microalgae produce a sulfurous gas called dimethylsulfide that can be converted into sulfates in the atmosphere.

Sea salt and dust are two of the most abundant aerosols, as sandstorms whip small pieces of mineral dust from deserts into the atmosphere and wind-driven spray from ocean waves flings sea salt aloft. Both tend to be larger particles than their human-made counterparts.

Scanning elecron micrographs of volcanic ash, pollen, salt, and smoke particles.

These scanning electron microscope images (not at the same scale) show the wide variety of aerosol shapes. From left to right: volcanic ash, pollen, sea salt, and soot. [Micrographs courtesy USGS, UMBC (Chere Petty), and Arizona State University (Peter Buseck).]

The remaining 10 percent of aerosols are considered anthropogenic, or human-made, and they come from a variety of sources. Though less abundant than natural forms, anthropogenic aerosols can dominate the air downwind of urban and industrial areas.

Fossil fuel combustion produces large amounts of sulfur dioxide, which reacts with water vapor and other gases in the atmosphere to create sulfate aerosols. Biomass burning, a common method of clearing land and consuming farm waste, yields smoke that's comprised mainly of organic carbon and black carbon.

Automobiles, incinerators, smelters, and power plants are prolific producers of sulfates, nitrates, black carbon, and other particles. Deforestation, overgrazing, drought, and excessive irrigation can alter the land surface, increasing the rate at which dust aerosols enter the atmosphere. Even indoors, cigarettes, cooking stoves, fireplaces, and candles are sources of aerosols.

Patterns

When viewed from space, a number of patterns emerge from Earth's aerosols—some driven by nature and others by man.

Nature generates broad swaths of particles—detectable by satellites—over both water and land. The strong winds of the "roaring forties" latitudes, for example, create a heavy band of airborne salt north of Antarctica. A thinner and more evenly dispersed veil of aerosols—primarily salt from whitecaps and sulfates from microalgae—usually covers most of the world's oceans. Over land, massive plumes of dust blow above deserts.

Map of aerosol optical thickness and fine particle fraction for August 2010.

This map shows the global distribution of aerosols and the proportion of those aerosols that are large or small. Intense colors indicate a thick layer of aerosols. Yellow areas are predominantly coarse particles, like dust, and red areas are mainly fine aerosols, like smoke or pollution. Gray indicates areas with no data. (NASA map by Robert Simmon, based on MODIS data from NASA Earth Observations.)

Meanwhile, the eastern portion of the United States and urban areas in Europe are hotspots for the production of human-made aerosols. Plumes of industrial aerosols — typically sulfates from coal power plants and black and organic carbon from vehicle traffic — rise from cities such as New York, Pittsburgh, London, and Berlin.

The western portion of the United States is comparatively clear, though some areas experience aerosol loads that rival the worst conditions in the East. Industrial aerosols, dust, and wildfire smoke frequently pollute the air in the Los Angeles Basin. Agriculture can produce heavy loads of soil dust, especially in California's San Joaquin and Imperial valleys, and the largest localized source of dust in the western U.S. is Owens Dry Lake, a river bed that was drained to provide water for LA. Likewise, the port of Houston has some of the most aerosol-laden air in the world.

Satellite image of pollution over Beijing.

Beijing was completely obscured by air pollution on October 9, 2010. This natural-color image was acquired by MODIS aboard the Aqua satellite. (NASA image by Jeff Schmaltz, MODIS Rapid Response.)

However, the most aerosol-laden air in the United States today pales in comparison to Asia. Satellites can detect a visible pall of aerosol clouds over Bangladesh, northern India, and northern Pakistan—an area called the Indo-Gangetic plain, especially during the pre-Monsoon season. The aerosol layer is comprised of complex mixtures of dust blowing from the Thar Desert and pollution from the densely populated plain. In eastern China, fast-growing cities such as Beijing also produce heavy blankets of aerosol.

Depending on the season and weather conditions, surges of aerosols can make their way into the atmosphere almost anywhere on Earth. In the Northern Hemisphere, plumes of mineral dust swirl over deserts and arid regions. In the Southern Hemisphere, slash-and-burn agriculture in the Amazon and Central Africa releases large amounts of smoke and soot. Fires, some sparked by lightning and some by human activity, leave large patches of forest ablaze during summers in Canada, Russia, and the United States.

Although most aerosols remain suspended in the atmosphere for short periods—typically between four days and a week—they can travel vast distances. Particles moving with the atmosphere at 5 meters (16.4 feet) per second will travel thousands of kilometers in a week. Dust plumes from the Sahara frequently cross the Atlantic and reach the Caribbean. Winds sweep a mixture of Asian aerosols—particularly dust from the Gobi desert and pollution from China—east over Japan and toward the central Pacific Ocean. Smoke from wildfires in Siberia and Canada can find its way to the Arctic ice cap.

Maps of dust aerosols crossing the Atlantic.

Dust from North Africa spreads over the Atlantic Ocean on July 1, 2009 (from 00:00 to 18:00 Universal Time) in this series of images derived from a computer model of aerosol movement. Click for animation. (NASA maps by Pete Colarco and Robert Simmon, based on GEOS-5 model data.)

Over time, aerosol emissions have changed significantly. In Asia, anthropogenic emissions have increased in recent decades as urbanization and industrialization has proceeded at a breakneck pace. By contrast, aerosols have declined in North America and Europe as factories have moved to developing countries and Western nations have adopted more stringent clean air regulations.

Aerosols and Incoming Sunlight (Direct Effects)

The Sun provides the energy that drives Earth's climate, but not all of the energy that reaches the top of the atmosphere finds its way to the surface. That's because aerosols—and clouds seeded by them—reflect about a quarter of the Sun's energy back to space.

Astronaut photograph of the Twitchell Canyon Fire.

Aerosols play an important role in Earth's climate. Most aerosols are brighter than land or ocean, and cool the Earth by reflecting sunlight back to space. (NASA astronaut photograph ISS024-E-15122.)

Different aerosols scatter or absorb sunlight to varying degrees, depending on their physical properties. Climatologists describe these scattering and absorbing properties as the "direct effect" of aerosols on Earth's radiation field. However, since aerosols comprise such a broad collection of particles with different properties, the overall effect is anything but simple.

Although most aerosols reflect sunlight, some also absorb it. An aerosol's effect on light depends primarily on the composition and color of the particles. Broadly speaking, bright-colored or translucent particles tend to reflect radiation in all directions and back towards space. Darker aerosols can absorb significant amounts of light.

Pure sulfates and nitrates reflect nearly all radiation they encounter, cooling the atmosphere. Black carbon, in contrast, absorbs radiation readily, warming the atmosphere but also shading the surface. Organic carbon, sometimes called brown carbon or organic matter, has a warming influence on the atmosphere depending on the brightness of the underlying ground. Dust impacts radiation to varying degrees, depending on the composition of the minerals that comprise the dust grains, and whether they are coated with black or brown carbon. Salt particles tend to reflect all the sunlight they encounter.

Maps of atmospheric heating and surface cooling caused by man-made black carbon aerosols.

Black carbon aerosols, similar to the soot in a chimney, absorb sunlight rather than reflecting it. This warms the layer of the atmosphere carrying the black carbon, but also shades and cools the surface below. (Maps adapted from Chung, 2005.)

Aerosols can have a major impact on climate when they scatter light. In 1991, the eruption of Mount Pinatubo in the Philippines ejected more than 20 million tons of sulfur dioxide—a gas that reacts with other substances to produce sulfate aerosol—as high as 60 kilometers (37 miles) above the surface, creating particles in the stratosphere. Those bright particles remained above the clouds and didn't get washed from the sky by rain; they settled only after several years.

Climatologists predicted global temperatures would drop as a result of that global sulfate infusion. They were right: Following the eruption, global temperatures abruptly dipped by about a half-degree (0.6°C) for about two years. And Pinatubo isn't a unique event. Large, temperature-altering eruptions occur about once per decade.

Graphs of aerosols and temperature from 1850 through 2000.

Large volcanic eruptions may lift sulfate aerosols into the stratosphere, which usually cools the global climate for the following year or two. (Graph by Robert Simmon, based on aerosol data from GISS and temperature data from the UAE CRU.)

In addition to scattering or absorbing radiation, aerosols can alter the reflectivity, or albedo, of the planet. Bright surfaces reflect radiation and cool the climate, whereas darker surfaces absorb radiation and produce a warming effect. White sheets of sea ice, for example, reflect a great deal of radiation, whereas darker surfaces, such as the ocean, tend to absorb solar radiation and have a net warming effect.

Aerosols, particularly black carbon, can alter reflectivity by depositing a layer of dark residue on ice and other bright surfaces. In the Arctic especially, aerosols from wildfires and industrial pollution are likely hastening the melting of ice.

Photograph of dark ash on the summit of Mount Ruapehu.

Dark aerosols dramatically change the reflectivity of the Earth's surface when they land on snow. Black ash covered the summit of New Zealand's Mount Ruapehu after an eruption in 2007, but was soon covered by fresh snow. Long-term accumulation of black carbon aerosols in the Arctic and Himalaya is leading to increased melting of snow. (Photograph ©2007, New Zealand GeoNet.)

Scientists believe the cooling from sulfates and other reflective aerosols overwhelms the warming effect of black carbon and other absorbing aerosols over the planet. Models estimate that aerosols have had a cooling effect that has counteracted about half of the warming caused by the build-up of greenhouse gases since the 1880s. However, unlike many greenhouse gases, aerosols are not distributed evenly around the planet, so their impacts are most strongly felt on a regional scale.

Despite considerable advances in recent decades, estimating the direct climate impacts of aerosols remains an immature science. Of the 25 climate models considered by the Fourth Intergovernmental Panel on Climate Change (IPCC), only a handful considered the direct effects of aerosol types other than sulfates.

Aerosols and Clouds (Indirect Effects)

Whereas aerosols can influence climate by scattering light and changing Earth's reflectivity, they can also alter the climate via clouds. On a global scale, these aerosol "indirect effects" typically work in opposition to greenhouse gases and cause cooling. While greenhouse gases disperse widely and have a fairly consistent impact from region to region, aerosol effects are less consistent, partly because of how the particles affect clouds.

Most elementary school students learn that clouds form when enough water vapor condenses. That's true, but aerosols play a critical role in the process. In fact, most clouds owe their existence to aerosols that serve as the tiny "seeds," called cloud condensation nuclei.

Natural aerosols—often sulfates, sea salt or ammonium salts—are the most common condensation nuclei in pristine environments. Polluted air, in contrast, usually contains much higher concentrations of water-soluble particles, which means pollution-rich clouds tend to have more numerous, but smaller, droplets. The small droplets make polluted clouds look brighter than they would otherwise be. Just as many bits of crushed ice give light more surfaces to reflect off—appearing brighter than a solid cube of ice—if the water in a cloud is divided into a larger number of smaller droplets, it will scatter more light and become more reflective.

Diagram of the effect of cloud condensation nuclei on cloud formation.

Clouds in clean air are composed of a relatively small number of large droplets (left). As a consequence, the clouds are somewhat dark and translucent. In air with high concentrations of aerosols, water can easily condense on the particles, creating a large number of small droplets (right). These clouds are dense, very reflective, and bright white. This influence of aerosols on clouds is called the "indirect effect," and is a large source of uncertainty in projections of climate change. (NASA image by Robert Simmon.)

Brighter clouds, in turn, block sunlight from reaching Earth's surface, shading the planet and producing net cooling. This cloud brightening effect—called the "cloud albedo effect"—may have a big impact on the climate, though only in recent years has it been possible to start quantifying the effect.

This impact of aerosols is clearly visible in ship tracks, bright streaks in marine clouds that look like airplane contrails. In the absence of ships, sea salt particles and the natural sulfates produced by phytoplankton seed most marine clouds. However, the exhaust from ship smokestacks make trails of sulfates and other aerosols that form long, bright clouds.

Overall, clouds are thought to cool Earth's surface by shading about 60 percent of the planet at any one time and by increasing the reflectivity of the atmosphere. Given that, just a 5 percent increase in cloud reflectivity could compensate for the entire increase in greenhouse gases from the modern industrial era in the global average. Likewise, long-term decreases in cloudiness could have major impacts.

However, aerosols are distributed around the planet differently than greenhouse gases, so the effects do not simply cancel each other. Parsing out how clouds—as well as feedback cycles involving clouds—affect regional climate systems remains a high priority for climatologists.

Satellite image of ship tracks in the North Pacific.

Map of the cloud droplet radius of ship tracks and clean clouds in the North Pacific.

The effect of aerosols on clouds is clearly visible in ship tracks—the dense, bright marine clouds formed by the exhaust of passing ships. This natural-color image shows the bright white clouds (top) and a map of cloud droplet radius (bottom). Where ship exhaust mixed with the cloud layer, droplets became much smaller. (NASA image by Jesse Allen and Robert Simmon, based on data from MODIS.)

Aerosols also have complex effects on clouds and precipitation. Broadly speaking, aerosols are thought to suppress precipitation because the particles decrease the size of water droplets in clouds. However, under some environmental conditions, aerosols can lead to taller clouds that are more likely to produce lightning and strong downpours. In a few places, meteorologists have even detected a cycle in which the frequency of thunderstorms is connected to mid-week peaks in aerosol emissions.

Aerosol type plays an important role in determining how aerosols affect clouds. Whereas reflective aerosols tend to brighten clouds and make them last longer, the black carbon from soot can have the opposite effect. Studies of pollution over the Indian Ocean and biomass burning smoke in the Amazon have shown that the black carbon warms the surrounding atmosphere and can cause cloud droplets to evaporate. This process, called the "semi-direct effect," turns clouds into a smoky haze that suppresses precipitation.

Satellite image of cloud and smoke interactions in the Brazilian Amazon.

Interactions between smoke and clouds are complex. In some cases, smoke and other aerosols help cloud formation. In others, smoke suppresses clouds. Both effects are apparent in this natural-color satellite image of the Brazilian Amazon, acquired on August 31, 2010. (NASA image by Jeff Schmaltz, MODIS Rapid Response.)

Current estimates suggest the cooling driven by aerosol indirect effects is less than half as much as the warming caused by greenhouse gases when averaged over the globe. But these indirect effects are highly uncertain and vary considerably in space and time. Therefore, on smaller space and time scales, the climate effects of aerosols can be significant.

The details of aerosol indirect effects are only partially understood, as most instruments cannot measure aerosols within clouds. Climatologists consider the role of clouds to be the largest single uncertainty in climate prediction. Less than a third of the models participating in the Fourth Intergovernmental Panel on Climate Change (IPCC) included indirect aerosol effects, even in a very limited way, and those considered only sulfate aerosols.

Measuring Aerosols

Although it became clear about 40 years ago that aerosols could affect climate, the measurements needed to establish the magnitude of such effects—or even whether specific aerosol types warm or cool the surface—were lacking.

The situation has improved considerably. Today scientists use an array of satellite, aircraft, and ground-based instruments to monitor aerosols. Radiometers—instruments that quantify the amount of electromagnetic radiation (light)—are among the most important tools available. The key quantity they report is aerosol optical depth (AOD), a measure of the amount of light that aerosols scatter and absorb in the atmosphere (and generally prevent from reaching the surface). An optical depth of less than 0.05 indicates a clear sky with relatively few aerosols and maximum visibility, whereas a value of 1 indicates hazy conditions. Optical depths above 2 or 3 represent very high concentrations of aerosols.

Global map of aerosol optical depth.

Aerosol optical depth is the fundamental measurement of quantity and distribution of aerosols. This map shows the average distribution of aerosols from June 2000 through May 2010, measured by the Multi-angle Imaging Spectroradiometer (MISR). Red indicates high concentrations of aerosols, beige indicates low concentrations. (NASA map by Robert Simmon, based on MISR data.)

Aerosol monitoring instruments also measure single scattering albedo (SSA), the fraction of light that is scattered compared to the total. Values for most aerosols range from about 0.7 for very absorbing particles to 1 for aerosols that only scatter light.

The first satellite instrument capable of crudely monitoring aerosol optical depth from space—the Advanced Very High Resolution Radiometer (AVHRR)—retrieved optical depth from measurements in the visible and near-infrared spectrum, beginning in the late 1970s. AVHRR, a passive radiometer, measured the intensity of sunlight as it reflected off aerosols, using the dark ocean as the background.

Over subsequent decades, the instruments have grown more sophisticated and made it possible to study aerosols over the land as well. Newer radiometers such as the Multi-angle Imaging Spectroadiometer (MISR) and the Moderate Resolution Imaging Spectroradiomer (MODIS) are capable of viewing aerosols at many more angles and wavelengths, providing more accurate results.

Satellite image and LIDAR profile of Saharan dust.

Satellite instruments such as CALIPSO can measure the distribution of aerosols in a vertical slice of the atmosphere. This image shows a dust plume off the west coast of Africa on April 22, 2010. (NASA image by Jesse Allen and Robert Simmon, based on data from MODIS and CALIPSO.)

Newer instruments also provide insight into properties of light that AVHRR couldn't detect. The Cloud Aerosol Lidar and Infrared Pathfinder Satellite Observer (CALIPSO) uses a laser-based technology that provides detailed vertical profiles of aerosol plumes and clouds. A French instrument, the Polarization and Directionality of the Earth's Reflectances (POLDER) offers insight into the orientation—or polarization—of light waves as they move through the atmosphere. This previously unmeasured quantity has proven helpful in retrieving particle type information. An instrument even more sensitive to the polarization of light, the Aerosol Polarimetery Sensor (APS), will gather additional insights after its launch aboard NASA's Glory mission in 2011.

Artist's rendering of the GLORY satellite in orbit.

Starting in 2011, the Glory mission will enable scientists to better characterize the types and distribution of aerosols. (NASA image by Ryan Zuber, GSFC Scientific Visualization Studio.)

Satellites provide a critical global perspective for understanding how aerosols affect Earth's climate, but they are far from the only source of information. Networks of ground-based sensors are used to validate satellite measurements and offer some of the most accurate measurements of AOD available.

NASA co-sponsors a global network of ground sensors called the Aerosols Robotic Network, or AERONET, which is comprised of more than 200 carefully calibrated sun photometers measuring aerosol optical depth around the world. The relatively simple instruments deduce the amount and type of aerosol in the sky by measuring the intensity of light under cloud-free conditions. Aircraft and other ground stations deploy in situ instruments that measure certain aerosol properties with greater accuracy, but less frequently.

Photograph of the CIMEL sun photometer at the Polar Environment Atmospheric Research Laboratory.

Photograph of NASA's Global Hawk UAV.

Land-based and airborne instruments complement NASA's satellites. AERONET is a global network of sun photometers that measures aerosols from the ground, such as this station in the Canadian Arctic (top). The Global Hawk Uninhabited Aerial Vehicle (bottom) can carry several instruments to measure aerosols from the air. Photograph by Ovidiu Pancrati, ©2007 CANDAC. Lower photograph by Tony Landis/NASA.)

Despite great progress, many questions remain about the competing impacts of aerosols. Measuring particles within clouds remains challenging. Different types of particles can clump together to form hybrids that are difficult to distinguish. And changes in humidity or temperature can cause drastic changes in how certain aerosols behave and interact with cloud droplets.

Most importantly, the quantitative uncertainties in the amount of aerosols, and especially aerosol properties, need to be reduced. Only better measurements—and the more sophisticated computer modeling such measurements make possible—will provide the critical information that scientists need to fully integrate aerosol impacts into climate models and to reduce uncertainty about how the climate will change.

  1. References

  2. Chin, M., Diehl, T. Ginoux, P. and Malm, W. (2007). Intercontinental transport of pollution and dust aerosols: implications for regional air quality. Atmospheric Chemistry and Physics, 7, 5501-5517.
  3. Chin, M., Kahn, R., and Schwartz, S. (2009). Atmospheric Aerosol Properties and Climate Impacts: A Report by the U.S. Climate Change Science Program and the Subcommittee on Global Change Research. Washington, DC: NASA.
  4. Chung, C., Ramanathan, V., Kim, D., and Podgomy, I. (2005). Global anthropogenic aerosol direct forcing derived from satellite and ground-based observations. Journal of Geophysical Research. 110, D24207.
  5. Holben, B., Tanré, D., Smirnov, A., et al. (2001). An emerging ground-based aerosol climatology: aerosol optical depth from AERONET. Journal of Geophysical Research, VOL. 106, NO. D11, PP. 12,067-12,097.
  6. Kaufman, Y., Tanré, D., and Boucher, O. (2002). A satellite view of aerosols in the climate system. Nature, 419, 215-223.
  7. Koren, I., Kaufman, Y., Remer, L., and Martins, J. (2004). Measurement of the effect of Amazon smoke on inhibition of cloud formation. Science, 303, 1342.
  8. Levin, Z. and Cotton, W.R. (2008). Aerosol pollution impact on precipitation: A scientific review. Report from the WMO/IUGG International Aerosol Precipitation Science, Assessment Group (IAPSAG). Geneva, Switzerland: World Meteorological Organization.
  9. Mishchenko, M., et al., (2007). Long-term satellite record reveals likely recent aerosol trend. Science, 315, 1543.
  10. Remer, L., et al., (2008). An emerging aerosol climatology from the MODIS satellite sensors. Journal of Geophysical Research, 113, D14S01.
  11. Seinfeld, J. (2008). Atmospheric science: Black carbon and brown clouds. Nature Geoscience, 1, 15–16.
  12. Solomon, S., D. Qin, M. Manning, Z. Chen, M. Marquis, K.B. Averyt, M. Tignor and H.L. Miller, (eds.). (2007). Climate Change 2007: The Physical Science Basis. Cambridge, United Kingdom and New York, NY, USA: Cambridge University Press.
  13. Unger, N., Bond, T., Wang, J., Koch, D., Menon, S., Shindell, D., and Bauer, S. (2010). Attribution of climate forcing to economic sectors. Proceedings of the National Academy of Sciences, 107, 3382-3387.

Aerosol Satin Black Paint Job

Source: https://www.earthobservatory.nasa.gov/features/Aerosols